 |
|
 |
Analog Oscilloscope 6502
|
|
20MHz Bandwidth |
| " |
Alt-Mag sweep for simultaneous display of main and X5 magnified trace |
| " |
1mV/Div Vertical sensitivity |
| " |
Alternate trigger for a stable display of unrelated signals |
| " |
X5 Sweep Magnification |
| " |
Large 6 inch CRT with internal graticule, for parallax free measurements |
| " |
Autofocus |
| " |
Internal Sync separator circuit for stable triggering on video signals |
| " |
Lightweight with low power consumption |
| " |
Supplied with 2 (X1, X10) probes and operating manual |
| " | | |
| |
|
|
Specifications |
|
Vertical Amplifier
(CH 1 and CH 2) | |
| Sensitivity |
5mV/Div to 5V/Div in 10 steps (1-2-5 seq)
X5 Mag: 1mV/Div to 1V/Div |
| Accuracy |
?3% (5% in X5 Mag) |
| Bandwidth (-3dB) |
DC to 20MHz |
| Rise Time |
< 17.5ns |
| Input Impedance |
1MW + 25pF |
| Input Coupling |
AC-Gnd-DC |
| Invert Channel |
CH2 |
| Display Modes |
CH1, CH2, Add, Dual |
| Chop Frequency |
250KHz ?3% |
| Maximum Input Voltage |
400V (DC or AC peak) |
| CH1 Signal Output |
20mV/Div into 50W: (50Hz to 5MHz) | |
|
|
|
| Sweep Time |
0.1?s/Div to 0.2s/Div in 20 steps (1-2-5 seq)
X5 Mag: 20ns/Div to 40ms/div |
| Accuracy |
?3% (?5% in X5 Mag) |
| Display Mode |
A, Alt-Mag, XY |
| Sweep Magnifier |
X5 ?5% |
| Trace Sep |
1.5 Div Min | |
|
|
|
| Linearity |
?3% (?5% in X5 Mag) |
| X-Y Mode |
CH 1-X axis, CH 2-Y axis |
| Sensitivity |
Same as CH 1 Vertical Amplifier |
| Bandwidth (-3dB) |
DC to 500KHz |
| Phase Error |
? 3? DC to 50KHz | |
|
|
|
| Modes |
Auto, Norm, TV-V, TV-H |
| Source |
CH 1, CH 2, Line, EXT |
| Coupling |
AC |
| Slope |
Positive or Negative |
| Trigger Sensitivity |
Int: DC to 2MHz: 2 Div
2MHz to 20MHz: 3 Div
Ext: DC to 2MHz: 200mV P-P; 2MHz to 20MHz: 300mV P-P
TV Synch: Int: 1 Div Min; Ext: 1 V P-P Min
TV-H (Television Line synchronizing Freq)
TV-V (Television Frame synchronizing Freq)
Automatically switched by the A Time/Div Front panel control |
| External Trigger Input |
Input Impedance: 1MW+ 20pF
Maximum Input Volts: 300V (DC or AC peak) | |
|
|
|
| Sensitivity |
5V P-P (Intensity increases with a negative going input) |
| Bandwidth (-3dB) |
DC to 2MHz |
| Input Impedance |
Approx. 33KW |
| Maximum Input Voltage |
30V (DC or AC peak) | |
|
|
|
| Frequency |
Approx. 1KHz (?20%) |
| Voltage |
0.5V P-P ?3% |
| Duty Cycle |
Approx. 50% | |
|
|
|
| Type |
6" rectangular CRT with illuminated internal 8 X 10 Div graticule (1 Div = 1cm) |
| Acceleration Voltage |
2kV | |
|
|
|
| Power Requirements |
AC Input Voltage: 100V, 120V, 220V, 240V ?10% selectable |
| Frequency |
50/60Hz |
| Power Consumption |
35W |
| Operating Temperature |
0 to 40?C |
| Size |
5.5" H x 13.4" W x 14.8" D |
| Weight |
24 lbs |
| Supplied Accessories |
Manual, AC Power cord, (2) X1/X10 Probes | | |
|
|
|
To request more information, please fill the form below.
|
|
|
|
ITS Instruments
Under Construction..
Click here to continue.
|
