|
|
|
6810CN - 100MHz Digital Storage Oscilloscope (Formerly D7510C)
|
|
|
100 MHz Analog bandwidth |
" |
250MS/s real time sampling rate and 50GS/s Equivalent time sampling |
" |
4K record length for each channel |
" |
FFT function and Pass/Fail |
" |
High resolution 320 x 240 Pixel 256 Color VGA LCD display |
" |
Optional extension module for RS232 and GPIB interfaces with ultra zoom software |
" |
20 Automatic waveform measurements |
" |
Auto-setup and auto calibration |
" |
10 waveforms and setups may be stored in memory |
" |
Peak Detect, built-in USB port, Digital Filters and Waveform Record/Playback |
Specifications |
|
|
No. of Inputs |
2 |
Analog Bandwidth |
DC to 100MHz |
Selectable Bandwidth Limit |
20MHz |
Rise Time |
< 3.5 ns |
Sensitivity |
2mV/Div to 5V/Div |
Resolution |
8 Bits |
Coupling |
AC/DC/Gnd |
Accuracy |
?3% |
Input Impedance |
1MW and 15pf capacitance |
Maximum Input Voltage |
400V DC |
Probe Attenuation Factors |
X1, X10, X100, X1000 | |
|
|
Sweep Rates |
2ns/Div to 50s/Div In a 1-2-5 sequence (to 10ps with zoom) |
Accuracy |
?100 ppm |
Resolution |
40ps | |
|
|
Bandwidth |
100MHz |
Phase Difference |
3? | |
|
|
Acquisition Modes |
Normal, Analog, Peak Detect |
Sampling |
Real and Equivalent |
Sample rates |
Real time: 10S/s to 250MS/s Equivalent Time: 50GS/s |
Record Length |
4K samples per channel |
Single Shot Bandwidth |
50MHz | |
|
|
Sensitivity |
Internal: 1div (DC to 10MHz) External:100mV (DC to 10MHz), 200mV (10MHz to 100MHz) External/5: 500mV (DC to 100MHz) |
Video Trigger Sensitivity |
Int: 2 Div P-P Ext: ?(0.3 Div + 40mV) Ext/5: 2V |
Trigger Level Range |
Int: ?12 Div from center of the screen Ext: ?1.6 Div Ext/5: ?8 Div Set Level: 50% |
Trig. Type |
Video, Edge, Pulse |
Trig. Modes |
Auto, Normal, Single |
Vsource |
CH 1, CH 2, Ext, Ext/5, AC line |
Coupling |
AC, DC, LF Reject, HF Reject | |
|
|
Auto Measurement |
Vp-p, Vrms, Vmax, Vmin, Vtop, Vbase, Vavg, V overshoot, V undershoot, Freq, Period, + or - Width, Rise and fall time, Delay time, +/- Duty cycle |
Cursor |
V, T, DT, DV and 1/DT | |
|
|
Type |
(CH1 + CH2), (CH1 - CH2), (CH1 x CH2), (CH1/CH2), FFT | |
|
|
Memory |
10 waveforms and 10 setups may be save and recalled for each channel | |
|
|
Frequency Points |
1024 |
Weighting |
Hanning, Hamming, Blackman-Harris, Rectangular | |
|
|
Size |
5.7" (Diagonal LCD) |
Resolution |
320 x 240 Pixels |
Type |
256 Color VGA LCD | |
|
|
RS232 |
Baud Rates: 300, 2400, 4800, 9600, 19200, 38400 |
GPIB |
IEEE 488.2 | |
|
|
Power Requirements |
100V to 240V, 45Hz to 450Hz |
Power Consumption |
< 50VA |
Operating Temperature |
10 to 40?C (50 to 104?F) at a relative humidity of 90% |
Size |
5.6" H x 11.3" W x 14.0" D |
Weight |
10 lbs |
Supplied Accessories |
Manual, Line cord, (2) X1/X10 probes |
Optional Accessories |
GPIB and RS-232 module, Flash RAM and Pass Fail module, Ulta-zoom software CD | | |
|
|
To request more information, please fill the form below.
|
|
|
ITS Instruments
Under Construction..
Click here to continue.
|