 |
|
 |
7802 - 2.6GHz Spectrum Analyzer Adapter
|
| " |
10MHz to 2.6GHz frequency range |
| " |
Advanced DSP design converts any 20MHz or greater dual trace oscilloscope to a 2.6GHz spectrum analyzer |
| " |
Resolution Bandwidths to 3KHz and zero span |
| " |
LCD reads out Frequency and Amplitude |
| " |
Over 75dB of display range |
| " |
Internal Calibration Range |
| " |
On screen markers |
| " |
Ideal for testing AM, FM, CB, Cellular, Marine, Aircraft and Cable TV equipment |
|
Specification |
|
|
|
| Range |
10MHz to 2.6GHz |
| Resolution |
1KHz center frequency |
| Stability |
±10ppm |
| Span |
Zero span, 2KHz, to 100MHz/ Div in a 1-2-5 sequence |
| Resolution Bandwidth |
3KHz, 30KHz, 220KHz, 4MHz |
| Resolution Bandwidth Accuracy |
±15% |
| Video Bandwidth |
1.6KHz typical (auto switched with RBW) |
| RF Sweep Rate |
20ms/Div | |
|
|
|
| Input Level Range |
-100dB to +20dBm |
| Usable Display Range |
75dB |
| Display Level Flatness |
±1.5dB at less than 10MHz/Div |
| Display Range Linearity |
±1.5dB over 70dB range
(Resolution Bandwidth dependant) |
| Reference Level Range |
-30dBm to +20dBm |
| Reference Level Accuracy |
±1.5dB at 80MHz ±1.5dB over +20 to -30dBm setting |
| Phase Noise |
-77dBc/Hz at 30KHz offset |
| Average Noise |
-140dBm/Hz (typical) | |
|
|
|
| Impedance |
50W |
| Maximum Overload |
+30dBm for 1 minute max |
| DC Block |
50V DC | |
|
|
|
| Power |
11V DC to 16V DC @ less than 1A |
| Power Consumption |
< 1A |
| Connectors |
RF input: Type N
Video and trigger output: BNC |
| Size |
3.0" H x 8.5" W x 10.0" D |
| Weight |
5 lbs |
| Supplied Accessories |
Manual, 12V @ 1A AC/DC adapter | | |
|
|
|
To request more information, please fill the form below.
|
|
|
|
ITS Instruments
Under Construction..
Click here to continue.
|
