 |
|
 |
Electro-Pneumatic Positioner YT-1000R
|
The Electro-Pneumatic Positioner YT-1000R is used for operation of pneumatic rotary valve actuators by means of electrical controller or control systems with an analog output signal of DC 4 to 20mA or split ranges.
• There is no resonance at 5~200Hz.
• The change of RA/DA Acting is convenient, it is able to apply to single or double acting actuator.
• It is possible to prevent the hunting with orifice to the small size actuator.
• It is economical due to less air consumption.
• It is able to control the 1/2 split range with simple operation without replacement of parts. |
|
| Specifications |
| Item.Type |
Single |
Double |
Item.Type |
Single |
Double |
| Input Signal |
4-20mA DC |
Ambient Temp |
-20 ~70 (Standard) |
| Impedance |
250 ±15 Ohm |
Linearity |
±1% F.S. |
± 2% F.S. |
| Supply Pressure |
1.4~7kgf/cm2 (20~100psi) |
Hysteresis |
±1% F.S. |
| Stroke |
0~90º . 0~60º |
Sensitivity |
± 0.2% F.S. |
± 0.5% F.S. |
| Air Connection |
PT (NPT) 1/4 |
Repeatability |
± 0.5% F.S. |
| Gauge Connection |
PT (NPT) 1/8 |
Air Consumption |
3LPM(Sup=1.4kgf/cm2 ,20psi) |
| Conduit |
PF 1/2 (G1/2) |
Flow Capacity |
80LPM(Sup=1.4kgf/cm2 ,20psi) |
| Explosion Proof |
Ex dm IIB T6
Ex dm IIC T6
Ex ia IIB T6 |
Material |
Aluminum Diecasting |
| Protection |
IP66 |
Weight |
2.8kg(6.2Ib) |
|
|
|
Downloads:
YT1000R.pdf
|
|
|
To request more information, please fill the form below.
|
|
|
|
ITS Instruments
Under Construction..
Click here to continue.
|
