Industrial Technical Services Instrumentation products pressure, level, temperature, flow, density, analyzers, humidity

EESIFLO can help you measure those small pipes/tubes carrying various types of liquid. These can be useful in countless applications where a non intrusive method is required for a small bore pipe or tube

Typical applications might include small tygon tubes, copper tubes, plastic tubes,PFA tubes carrying water or ultrapure water, deionized water,chemical feeds, cmp slurries,acids, corrosive, erosive and toxic fluids,hydraulic fluids, juices and other liquids

Special Application clamp on meters for 0.03937 inches (1mm) Internal Diameters to 3/4 inches (19.5mm) ID

The EESIFLO Series meters are specifically designed for use with small pipes carrying water or chemicals and other types of liquids. The system is completely non-intrusive and requires little knowledge of ultrasonics to set up successfully . The advantage of this system is increased accuracy due to certain parameters that have been fixed by the clamping fixture provided
The system can measure three sizes of pipe sizes 1/2, 3/8 and 3/4 inch pipes. Measurements can be made in a couple of minutes. The standard configuration is a panel mount version but other versions are available upon request.

Description:
The EESIFLO Series meters are specifically designed for use with small pipes carrying water or chemicals and other types of liquids. The system is completely non-intrusive and requires little knowledge of ultrasonics to set up successfully . The advantage of this system is increased accuracy due to certain parameters that have been fixed by the clamping fixture provided

The system can measure three sizes of pipe sizes 1/2, 3/8 and 3/4 inch pipes. Measurements can be made in a couple of minutes. The standard configuration is a panel mount version but other versions are available upon request.

Applications

	Water measurements
	Chemical Measurement
	Oil Measurements
	Small pipe flow rates
	DI Water
	Saline Solution flow measurement
	Special Applications (Consult Factory)

Features

	Microprocessor controlled
	Programmable
	Easy to use

Specifications:

Model: EESIFLO S-Series
Measurement Method: Transit Time
Calculation Method: Microprocessor based
Measurement Fluids: Water and other types of liquids (special applications on request)
Measurement Accuracy: ? 2% RD (1m/s-10m/s range)
Flow Velocity Resolution 5mm/s
Flow Velocity Range : From 0-10 m/s
Housing Material: Fibre Glass Resin. Temp Range -10 to 50?C (Display 0-50?C)
Power Requirements: 12-30 VDC
Power Consumption: 2.5 VA Max
Weight Approximately: 330g

Outputs
Current Output 4-20 mA (load resistance 450 Ohms or less)
Pulse Output (Open collector rating 30VDC,0.25A)
Alarm Output (Upper and lower limits can be set)
Display
Backlit LCD (16 Characters 2 Lines)
Instanatneous Flow Rate , Flow Velocity and Totalised flow rate (selectable)
Sensor Clamping Set
Material PTFE Sensors
Operating conditions 10 to 60 ?C
Cable 5 metres as standard (10m available on request)