|
Products
»
By Application
»
Component Testers
»
Z9216 - High Accuracy, Wide Range LCR Meter
|
|
|
Z9216 - High Accuracy, Wide Range LCR Meter
 |
| " |
0.2% basic accuracy |
| " |
Wide measurement range over13 orders of magnitude |
| " |
Store and recall 9 instrument setups |
| " |
Measurement rates to 20 times per second |
| " |
Test frequencies are 100Hz, 120Hz, 1KHz, 10KHz and 100kHz |
| " |
Displays component value and Q or Dissipation factor |
| " |
Averaging for 2 to 10 measurements |
| " |
RS-232 and optional GPIB and Handler interface |
| " |
Open and short circuit compensation for accurate zeroing |
| " |
Easy to use and calibrate |
| " |
Built-in calibration procedures |
| " |
Binning capabilities |
|
Specification |
|
|
|
| Abbreviations Used |
L (inductance)
C (capacitance)
R (resistance) |
| Measured Circuit Configurations |
series and parallel | |
|
|
|
| Measured Parameter (R) |
R + Q |
| Measurement Ranges (R) |
R: 0.0001 W to 2000 MW
Q: 0.00001 to 50 |
| Measured Parameter (L) |
L + Q |
| Measurement Range (L) |
L: 0.0001 ?H to 99999 H
Q: 0.0001 to 50 |
| Measured Parameters (C) |
C + D and C + R |
| Measurement Range (C) |
C: 0.0001pf to 99999?F
D: 0.00001 to 10
R: 0.00001KW to 9999KW |
| Display |
Values, % deviation, or bin number | |
|
|
|
| Test Frequencies |
100Hz, 120Hz, 1KHz, 10KHz, 100KHz |
| Frequency Accuracy |
? ?100 PPM |
| Drive Voltages |
Fixed: 0.10, 0.25, 1.0V RMS
Vernier: 0.1 to 1.0V RMS (50 mV resolution) |
| Drive Voltage Accuracy |
?2% |
| Measurement Rates |
[For test frequencies of 1KHz or greater]
Slow: 2 measurements/Sec
Medium: 10 measurements/Sec
Fast: 20 measurements/Sec
[For test frequencies of 100Hz and 120Hz]
Slow: 0.6 measurements/Sec
Medium: 2.4 measurements/Sec
Fast: 6 measurements/Sec |
| Bias Voltage |
Internal: +2.0 V DC ?2%
External: 0 to +40 V DC |
| Input Protection |
0.25A/250V Fuse |
| Ranging |
Auto or manual |
| Triggering |
Continuous, manual or remote (from the RS-232, GPIB or handler interface) | |
|
|
|
| Basic Accuracy |
?0.2% with the following conditions:
1. An ambient temperature of 23?C ?5?C after a 30 minute warm up period.
2. The short and open Cal has been performed.
3. D < 0.1 for capacitance, Q < 0.1 for resistance and Q > 10 for inductance.
The component value, measurement rate and frequency determine the actual measurement accuracy. (See the user manual). |
| Zeroing Correction |
Open and short circuit compensation |
| Remote Operation |
Interfaces: RS-232 (25 pin D female conductor), Standard GPIB and Handler (25 pin D male connector optional) | |
|
|
|
| AC Voltage Input |
120/220V |
| Frequency |
50/60Hz |
| Power Consumption |
20W |
| Operating Temperature |
0 to 50?C at < 80% Relative Humidity |
| Size |
4.3" H ? 14.3" W ? 14.5" D |
| Weight |
18 lbs |
| Supplied Accessories |
Manual, Line cord, Axial lead adapter |
| Optional Accessories |
GPIB and Handler interface, Kelvin clips, SMD tweezers | | |
|
|
|
To request more information, please fill the form below.
|
|
|
|
