Products
»
By Application
»
Signal Generators
»
9301/9302 - 1 & 2 Channel Synthesized Function/Arbitrary Waveform
|
|
9301/9302 - 1 & 2 Channel Synthesized Function/Arbitrary Waveform
|
" |
Log, linear, phase continuous sweeps |
" |
Frequency to 31MHz |
" |
0.01?Hz frequency resolution |
" |
16 to 16K points arbitrary waveform lengths |
" |
Standard waveforms: Sine, Square, Triangle, Ramp and Noise |
" |
Includes waveform design software |
" |
Waveforms may be designed via front panel or software |
" |
Dual independent channels (9302) |
" |
Sweep times to 1000s |
" |
AM, FM and phase modulation |
" |
RS-232 and software interface |
Specification |
|
|
Waveforms |
Sine, Square, Triangle, Ramp Noise, Abitrary | |
|
|
Sine |
0.01?Hz to 31MHz |
Square |
0.01?Hz to 12MHz |
Ramp and Triangle |
0.01?Hz to 2MHz |
Noise |
10MHz | |
|
|
Output |
9301: 1CH 9302: 2CH |
Output Volts |
20mV to 20V P-P, no load 10mV to 10V P-P, into 50W |
Resolution |
3 digits |
Best Accuracy |
Sine wave: ?0.2dB (1?Hz to 20MHz) Square Wave: ?3% (0.01?Hz to 100KHz) Ramp, Triangle and Arbitrary: ?3% | |
|
|
Offset |
0 to ?10V (no load) 0 to ?5V DC (50W load) |
Resolution |
3 digits |
Accuracy |
?1.5% + 0.2mVDC | |
|
|
Sine Wave Spectral Purity Spurious |
< -50dBc (non harmonic) |
Phase Noise |
< -50dBc in a 30KHz band |
Subharmonics |
< -50dBc |
Harmonic Distortion |
-45dBc: DC to 1MHz -32dBc: 1KHz to 31MHz | |
|
|
Rise/Fall Time |
< 15ns from 10 to 90% of full amplitude |
Asymmetry |
< 1% of period + 4ns |
Overshoot |
< 5% | |
|
Ramp, Triangle and Arbitrary | |
Rise and Fall Time |
<35ns |
Settling Time |
<1?s |
Linearity |
?0.5% FS | |
|
|
Standard |
Sine, Square, Triangle, Ramp, DC, Exponential Fall, Noise, Freehand, Line, Damped Sine |
Sample Rate |
40MS/s (Max) |
Waveform Length |
16 to 16,384 points |
Amplitude Resolution |
12 Bit | |
|
|
Range |
9999.99? |
Resolution |
0.01? |
Rate |
0.001Hz to 10KHz | |
|
|
Source |
Internal |
Waveforms |
Sine, Square, Ramp, Triangle, Ramp, Arbitrary |
Rate |
0.001Hz to 10KHz |
Span |
0.01Hz to 31MHz (2MHz for Triangle or Ramp) | |
|
|
Source |
Internal or external |
Waveforms |
Sine, Square, Ramp, Triangle, Arbitrary |
Depth |
0 to 100% |
Rate |
Internal: 0.001Hz to 10KHz; External: 20KHz Max. |
Distortion |
< -35dB |
DSB Carrier |
< -35dB typical at 1KHz modulation rate |
Ext. Input |
5V for 100% modulation | |
|
|
Type |
Linear or log, phase continuous |
Waveforms |
Up, down, Up-down, Single sweep |
Sweep Time |
100?s to 1000s (0.001Hz to 10KHz) |
Span |
0.01?Hz to 31 MHz (2MHz for Ramp and Triangle) |
Markers |
Two markers may be set between any sweep point. Sweep Output - 0 to 10V linear ramp signal synchronized to sweep. | |
|
|
Waveforms |
Sine, Square, Triangle, Ramp, Arbitrary |
Frequency |
2MHz Max for any waveform |
Count |
1 to 65,000 cycles/burst |
Phase Shift |
?100KHz | |
|
|
Source |
CH 1: Single, Int rate, Pos Ext, Neg Ext 1, Line CH 2: Int CH 1, Int rate, Pos Ext 2, Neg Ext 2 (9302 only) |
Rate |
100?s to 999.99s |
External |
Positive or negative slope, TTL input |
Output |
TTL Level | |
|
|
Accuracy |
?3 PPM (20 to 30?C) |
Aging |
?3 PPM/Yr |
Input |
10MHz/N ?2 PPM where N=1 to 8.1V P-P Min input level |
Output |
> 1V P-P 10MHz sine wave into 50W | |
|
|
Interface |
RS-232 (baud rates from 2400 to 19.2k bps, DCE) |
Size |
14.0" W ? 3.5" H ? 13.5" D |
Weight |
22 lbs |
Power Consumption |
46W (9301); 80W (9302) |
Supplied Accessories |
Manual, Line cord, Software, BNC cable | | |
|
|
To request more information, please fill the form below.
|
|
|