Home | About Us | Products | Services | Careers | Contact Us | Resources | Testimonials     Under Construction..   Click here to continue. Products » By Application » Signal Generators » B810 - Sweep Function Generator 0.01Hz to 10MHz   B810 - Sweep Function Generator 0.01Hz to 10MHz " Wide (0.01HZ to 10MHz) Frequency Range " Burst and Triggered mode " Sweep start/stop capability " Six digit LED frequency readout " Log. or Lin. sweep " Built-in 10MHz frequency counter " External FM with the VCG input " Output can be amplitude modulated Specification Output Characteristics Frequency Range 0.01Hz to 10MHz in 9 ranges Output Level ?10 Volts into 50W Waveforms Sine, Square, Ramp, Pulse Attenuator 20dB, 40dB, 60dB & 20dB variable Impedance 50W DC Offset ?5V in to 50W Sine Wave Flatness ?0.2dB: 0.01Hz to 100KHz Distortion 0.5% Triangle Wave Linearity > 99% Square Wave Rise/Fall Time ? 25ns (into 50W) Pulse Duty Cycles 20:80 to 80:20 may be obtained Operating Modes Modes CW, Triggered, gated, burst, sweep Trigger/Gate Input Level TTL Burst Time 1ms to 10s Trigger/Gate Freq. Range 0.1Hz to 1MHz Sweep Types Linear and Log Sweep Time 1ms to 10s Sweep Width Variable to 100:1 Start Freq 0.01Hz to 10MHz AM Modulation Type Internal Modulation Level 0 to 100% Modulation Voltage 0 to 5V Modulation Frequency DC to 1MHz FM Modulation Type External Tuning Range 1000:1 with an input voltage of 0 to -5V (VCG) Frequency Counter Measuring Range 1Hz to 10MHz Gate Time 0.01s, 0.1s, 1s, 10s Accuracy ?0.01% Sensitivity 50mV RMS Max Input V 250V DC and AC RMS Input Impedance 1MW General Specifications Power Requirements AC Line Voltage: 100/120/220/240V ?10% Frequency: 48Hz to 66Hz Power Consumption 9VA Operating Temperature 0 to 50?C Size 3.8" H ? 11.5" W ? 12.5" D Weight 8 lbs Supplied Accessories Manual, Line cord, BNC cable To request more information, please fill the form below. First Name: Last Name: Title: Company: Address: City: E-mail: Phone: - Comments: