|
Anderson pharmaceutical series sensors and gauges are the surest way to meet an engineering specification as they all feature enhanced performance specifications and 316 "L" stainless steel materials, electropolished to a maximum Ra of .2 microns (8 microinches).
In addition, permanently etched tagging information and calibration certificates are provided at no extra charge.
Biopharmaceutical Flow Product Line
 |
Based on the proven design of the HM turbine meter, the HMP Turbine Flowmeter satisfies the specific design and performance requirements of Life Sciences applications. The HMP uses a bushing and shaft combination which makes the HMP suitable for intense sterilization processes and allows for steam blow down. The HMP is designed in accordance with the current ASME BPE flowmeter standard and is provided with necessary certifications and calibration documentation.
Form AIC 5046 :
Brochure | Manual |
|
Biopharmaceutical Level Product Line
 Anderson electronic level transmitters are designed to accurately and repeatedly monitor the liquid height in a variety of process and storage vessels from a minimum height of 30 inches up to a maximum of 100 feet. Weld-in shells are available to provide a truly flush diaphragm seal with the inside wall of the tank. A special "mini" level transmitter is also available for simple level control applications in CIP vessels. The completely electronic "Differential" level transmitter eliminates bulky, hard to handle capillaries that in the past were a requirement on pressure or vacuum vessels. Anderson also offers a complete line of single and multiple channel micro-based level monitors which feature programmable self-points and alarm relays, as well as digital communications.
|
|
Liquid Level Transmitter (SX)
The Anderson Pharmaceutical Electronic Level Transmitter (SX) is designed to measure static head pressure in sanitary process and storage tanks.
Form AIC 5006P:
Brochure | Startup Guide |
|
|
|
LA "Top Mount" Level Transmitter
Based on our SX"Driftless" Transmitter, this top mount variation easily replaces problematic devices such as ball floats, pneumatics, capacitance probes and magneto-strictive sensors.
Form AIC 5011P:
Brochure | Manual | Startup Guide |
|
 |
LN Potentiometric Level Transmitter
A top mount insertion probe, the LN is designed with process control in mind. Ideal for filler bowls, balance tanks, and pressurized vessels, the LN is immune to pressure or temperature changes excelling in applications where pressure based sensors come up short.
Form AIC 5041:
Brochure | Startup Guide |
|
|
|
HB Series "Mini" Level Transmitter
This sensor has been specifically designed for use in simple level control applications such as balance tanks and CIP Vessels. It is designed for harsh environments and stands up to direct wash-downs and wide variations in temperature.
Form AIC 5005:
Brochure | Manual |
|
|
|
Electronic Sanitary Differential Level Transmitter (TDL)
A fully electronic, differential pressure/level measurement system. It is designed to monitor levels in pressurized storage tanks, vacuum vessels, and surge tanks.
Form AIC 5012:
Brochure | Data Sheet Order Form | Manual |
|
 |
"LB" Point Level Probes for Conductive Liquid Applications
3-A approved sanitary point level. The LB provides up to four independent level points with probe lengths to 72". Paired with the "LL" switching module, the point level system allows choices of normally open or closed contacts and accommodates a broad variety of conductive media.
Form AIC 5037:
Brochure | Competitive Cross Over | Startup Guide |
|
 |
The NCS31P is designed to work with virtually every liquid media in the Life Sciences market. Based on the capacitive principal the NCS31P is independent of conductivity and performs excellently in media such as WFI. As with all Anderson Pharmaceutical Series Products the NCS31P was designed in accordance with the latest ASME-BPE standard. Due to the low sensor profile the NCS31P can be used in small line sizes without sacrificing dead leg length.
|
Biopharmaceutical Pressure Product Line
 The Anderson line of Pharmaceutical pressure instruments includes gauges, indicating switches, and transmitters designed to meet the most stringent specifications for accuracy, surface finish, and temperature stability. Analog (4-20mA) and SMART (4-20mA plus HART) pressure transmitters are available with fractional (3/4") tri-clamp fittings as well as standard 1.5 and 2 inch sanitary connections. Our new "CPM" fitting line provides a means of eliminating pockets or deadlegs in critical application. Applications include process lines and vessels, filtration equipment, pumps, heat exchangers, and other pressure dependent devices or processes. Detailed specifications may be found in the comprehensive Anderson Pharmaceutical products catalog.
 |
Digital Pressure Gauge & Switch
This gauge provides a battery-powered, local display of pressure that is 6 times more accurate than its mechanical counter-part, with 3 times the over-range capacity and 5 to 10 times the resolution! The EPS version provides all this, PLUS 2 fully adjustable switches with low-voltage relay outputs for simple control and/or alarming.
Form AIC 5038P:
Brochure | Firmware | Manual |
|
 |
EK Pharmaceutical Series Pressure Gauge (63mm)
This 63mm gauge was developed to address the growing number of biopharmaceutical applications that require a smaller gauge dial and fractional sanitary fitting.
Form AIC 5008:
AUTOCLAVE | Brochure | Startup Guide | 3D Drawing
|
 |
"EM-Series" Sanitary Pressure Gauge
Improved version of our EB series 90mm gauge incorporating a more compact profile, and the industry's only externally adjustable standard span and offset.
Form AIC 5017:
Brochure | Startup Guide |
|
 |
"Mini" Sanitary Pressure Gauge
This gauge was developed to address the growing number of biopharmaceutical applications that require a smaller gauge dial and fractional sanitary fitting.
Form AIC 5008:
AUTOCLAVE | Brochure | Startup Guide |
|
 |
Sanitary Foundation Fieldbus Pressure Transmitter
The "FPP" series communicates digitally with a Foundation Fieldbus host device permitting configuration of parameters such as range, engineering units, tagging info, and other device specific information, from any accessible point in the network. Anderson's "FPP" series transmitters provide an abundance of information to improve predictive maintenance, plant safety, product quality, and regulatory compliance.
Form AIC 5023:
Brochure | Manual |
|
 |
T-Series "Smart" Pressure Transmitter
The Anderson "T" series pressure transmitter is a microprocessor-based sensor specifically designed for sanitary fluid process applications in the pharmaceutical and biotechnology industries.
Form AIC 3705:
Brochure | Manual |
|
 |
CPM - Clean Process Measurement Fittings
Sanitary pressure gauges and transmitters that can be installed on lines as small as 1/2" without the need for adapters or reducers, without creating pockets or "dead legs", and without sacrificing performance.
Form AIC 3572:
Brochure | Tech Bulletin |
|
 |
Pressure Gauges
This gauge has rapidly become the pressure gauge of choice for applications in the pharmaceutical and biotechnology industries.
Form AIC 3563:
Brochure |
|
|
IPS 200 Indicating Pressure Switch
This gauge offers user adjustable high and low setpoints and provides a separate solid state, ground closure switch for each.
Form AIC 3651:
Brochure |
|
 |
RSV Pressure Transmitter
The Anderson RSV Pharmaceutical Series Pressure Transmitter offers not only a new low profile design, but may be ordered with built-in LCD indication.
Form AIC 3562:
Brochure | Manual |
|
 |
Mini Pressure Transmitters
Anderson's newest sanitary pressure transmitter is specifically designed for critical measurements in fractional size lines. This product replaces the two piece fractional transmitter with a very compact, single piece transmitter.
Form AIC 5003:
Application Bulletin | Brochure | Manual |
|
 |
Autoclaveable Pressure Transmitters
Anderson 's newest sanitary pressure transmitter improves upon the solid performance of the standard HA by allowing the device to be autoclaved in place. Improve enclosure integrity and tighter accuracy and stability will make this the transmitter of choice in both autoclave and critical applications.
Form AIC 5049:
AUTOCLAVE | Brochure |
|
 |
MPP Pharmaceutical Series Modular Pressure Transmitter
Designed specifically for the needs of the Life Science market the MPP Pharmaceutical Series Pressure Transmitter provides state of the art performance in a superior sanitary package. Developed from Anderson’s Next Generation Modular Platform the MPP delivers class leading performance while providing the benefits of a modular architecture, assembled in an ASME –BPE compliant design. The MPP is 24 v DC, Loop powered (2 wire) 4 – 20 mA output with HART 7.0
Form AIC 5074:
Brochure | Manual | Software | Startup Guide | Startup Guide - Remote | 3D Drawing
|
Biopharmaceutical Temperature Product Line
 Anderson modular RTD's and temperature transmitters are designed for pharmaceutical processing and sterilization applications. Elements, available with a wide variety of direct process and and thermowell connections, mate directly with RTD or transmitter wiring heads. A unique O-ring seal eliminates exposed threads at this connection. Transmitter modules can be analog or SMART, both available with optional digital displays. Also available are bimetal thermometers and the FJ digital thermometer. All electronic sensors are available with sanitary clamp configurations in 1/2 inch through 4-inch, as well as in thermowell mountings.
Thermowells can be specified as weld-in or clamp style, with all 316 "L" stainless materials and electropolished finishes. Weld-in thermowells are supplied with material certifications and permanently marked "heat numbers" as standard.
|
|
Sanitary RTDs and Temperature Transmitters with Foundation Fieldbus Communications
Our newest electronic temperature sensors now feature Foundation Fieldbus communications capability in addition to the existing analog and HART "SMART" communication protocols.
Form AIC 5001P:
Brochure | Manual | Startup Guide |
|
 |
Thermowells - Sanitary Clamp Type, is designed for use with any 1/4" diameter probe having a 1/2" NPT threaded connector. The Sanitary Projectile Type is designed to be welded into process & storage vessels & accept a variety of sensors.
Form AIC 3567:
Brochure |
|
|
|
"DTG" - Digital Temperature Gauge
The DTG has been designed as a "best-in-class" digital thermometer for typical Pharmaceutical and Bio-tech applications. The unit provides a battery-powered local display of temperature, visible on a large 0.9" LCD display. Numerous fitting choices ensure simple transition from existing bi-metal or other thermometers to the DTG. Optional secondary RTD temperature element, switching/alarming and remote display are also now available. Switching versions can also be "loop-powered" to eliminate the need for batteries.
Form AIC 5056:
Brochure | Startup Guide |
|
Biopharmaceutical Analytical Product Line
 |
The HC series toroidal conductivity sensor is specifically designed to be used on CIP systems to measure conductivity in cleaning solutions ranging from 0-200 up to 0-2,000,000 microSiemens/cm and temperature compensated over a range of 0° and 200°C. With its unique stainless steel housing and Teflon coated probe, these sensors are impervious to process coating or contamination. The sensors may be ordered with our model DA1, 1/4 DIN panel mount Analyzer or DA2, NEMA 4X Transmitter which may be panel, wall, pipe or integral sensor mounted.
Form AIC 5022:
Analyzer Manual | Brochure | Sensor Manual | Transmitter Manual |
|
Biopharmaceutical Instrumentation Product Line
 The Anderson line of electronic process indicators and recorders includes both 10 inch and 12 inch circle chart recorders and recording controllers. The Uni-Quad monitor offers digital display of up to four different variables in any combination and is directly compatible with any Anderson sensor. Anderson also offers a powerful 1/8 DIN controller in an optional NEMA4X enclosure with pre-piped I:P transducer, for stand-alone controller applications.
The revolutionary AV-9000 prints trends, scales, and alpha-numeric messages on plain paper in four colors. Its unique printing technology prints all four variables in "real-time", making it the optimum solution for critical autoclave and sterilizer applications.
|
|
AV-9000 Recorder/Recording Controller - Innovative Printing Technology for Circular Chart Recording This revolutionary circular chart recorder features a four-color marker pen cartridge which prints information as it glides across 10, 11, or 12 inch charts.
Form AIC 3661:
Brochure | Data Sheet Order Form | Manual |
|
 |
GL Series- Micro-based Digital Indicator
The GL Series provides a simple means of specifying one or two digital panel meters (based on our AWESOME panel meters) pre-mounted in a NEMA 4X watertight enclosure.
Form AIC 5016:
Brochure |
|
 |
AWESOME 1/8 DIN Panel Meters
Analog and digital panel meters offering multiple control and alarm outputs, optional serial communication and specialized functions on analog input units. The units also boast a programmable color change display that is 27% larger than ordinary 1/8 DIN units.
Form AIC 5010:
Brochure | Manual - DC Process | Manual - Temp. Ind. |
|
|
|
AIC 801 Micro-Based 1/8 DIN Controller
This controller is designed for use on virtually any process control application.
Form AIC 3601:
Brochure | Manual | Manual - Concise | Tech Bulletin | Tech Bulletin |
|
 |
Pulse 100 - Single Channel Liquid Level Monitor
The Pulse 100 microprocessor-based monitor is designed for those customers wishing to monitor liquid levels in a single vessel.
Form AIC 3388:
Brochure | Manual |
|
|
